---
title: "Bluetooth Low Energy (BLE) radio regulatory compliance"
id: "bluetooth-low-energy-ble-radio-regulatory-compliance"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/bluetooth-low-energy-ble-radio-regulatory-compliance"
updated: 2026-10-29T18:46:01Z
---

# Bluetooth Low Energy \(BLE\) radio regulatory compliance

[Home](/articles/clean-power-vfd-publication/home) » [Compliances and certifications](/articles/clean-power-vfd-publication/compliances-and-certifications) » Bluetooth Low Energy (BLE) radio regulatory compliance

* * *
 
The Clean Power VFD HMI includes a Bluetooth Low Energy (BLE) radio for short-range wireless communication with compatible Bluetooth devices.

The BLE radio operates in the 2402–2480 MHz band with a maximum transmit power of +4 dBm (2.5 mW) at the antenna port. It is certified for use in the regions listed below.

| Region | Certification identifier | Marking |
| --- | --- | --- |
| United States | Contains FCC ID: HSW2832 | Class A digital device, FCC Part 15 |
| Canada | Contains IC: 4492A-2832 | CAN ICES-003(A) / NMB-003(A) |
| European Union | EU Declaration of Conformity | CE |

![](/resources/Storage/clean-power-vfd-publication/res/Safety%20picture%20Yellow%20Caution.png)

Do not modify the BLE radio, its antenna, or its radio-frequency configuration. Changes to the radio system may invalidate the regulatory compliance of the HMI.

* * *

## Regulatory identification

Certification identifiers and compliance markings are provided on the HMI regulatory label and on the HMI regulatory information screen.

To view the regulatory information screen:

**[PLACEHOLDER — HMI navigation path. Maximum three menu steps, for example: Menu &gt; About &gt; Regulatory information.]**

* * *

##  United States — FCC compliance

The HMI contains an FCC-certified radio module.

**Contains FCC ID: HSW2832**

##  FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

##  Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

##  Note (Class A Industrial Equipment):

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

* * *

## Canada — ISED compliance

The HMI contains a radio module certified for use in Canada. The BLE radio is licence-exempt and does not require an individual radio licence for normal operation.

**Contains IC: 4492A-2832**

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The HMI is Class A industrial equipment. The applicable interference-causing equipment standard is:

**CAN ICES-003(A) / NMB-003(A)**

* * *

##  European Union — Radio Equipment Directive

The radio equipment incorporated into the HMI is intended for short-range wireless communication between the Clean Power VFD and compatible Bluetooth devices. Radio-frequency characteristics are given at the top of this topic.
&lt;!-- VERBATIM — RED 2014/53/EU Art. 10(9) simplified DoC. The type designation below must match the EU Declaration of Conformity exactly. --&gt; 
Hereby, SmartD Technologies Inc. declares that the radio equipment type Clean Power VFD HMI is in compliance with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address:

**[PLACEHOLDER — SmartD EU Declaration of Conformity URL]**

Manufacturer:

**[PLACEHOLDER — SmartD Technologies Inc. registered name and postal address, required by RED Art. 10(6).]**