---
title: "Configuration application"
id: "configuration-application"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/configuration-application"
updated: 2026-10-29T18:46:18Z
---

# Configuration application

[Home](/articles/clean-power-vfd-publication/home) » [Mobile App](/articles/clean-power-vfd-publication/mobile-app) » Configuration application

* * *
 
**Get the smartphone App to configure your Clean Power VFD.**

Phone requirements:

* Android phone with firmware version 9 or higher,
* iOS phone with firmware version 13.4 or higher.

The Clean Power VFD Application app can be downloaded with any of the methods below:

* **Scan the QR code displayed on the Clean Power VFD's HMI screen**, this will bring you to the Google Play Store or Apple Store for App downloading.
* **Click on the below badge for ios users**

[![](/resources/Storage/clean-power-vfd-publication/Download_on_the_App_Store_Badge_US-UK_blk_092917.png)](https://apps.apple.com/ca/app/smartdrive-manager/id1539682331)
* **Click on the below badge for Android users**

[![](/resources/Storage/clean-power-vfd-publication/google-play-badge.png)](https://play.google.com/store/apps/details?id=com.smartdrive.smartdrive&amp;hl=en&amp;gl=US)
* or scan the following QR code with your cell phone:

Apple store:

![](/resources/Storage/clean-power-vfd-publication/qr-code-download%20on%20Apple%20store.png)

Google Play:

![](/resources/Storage/clean-power-vfd-publication/qr-code-GetApp%20on%20Google%20play.png)

![](/resources/Storage/clean-power-vfd-publication/res/Safety%20picture%20Yellow%20Caution.png)

On first launch, the app will ask for two permissions so it can find and connect to your device over Bluetooth:

* **Bluetooth** access
* **Location** (on iOS and older Android) or **Nearby devices** (on newer Android)

We only use these to enable Bluetooth. We do **not** track or store your location.
 
## iOS (first launch)

1. When asked to “Allow Clean Power VFD to use **Bluetooth**,” tap **OK**.
2. If you’re also asked for **Location**, tap **Allow While Using App**.
3. Keep Bluetooth turned **On** in Control Center/Settings.

If you tapped “Don’t Allow” by mistake: go to **Settings › Clean Power VFD**, enable **Bluetooth** and **Location**.
 
## Android 12 and newer (first launch)

1. When asked to allow **Nearby devices**, tap **Allow**.
2. Keep Bluetooth turned **On** (Quick Settings).

If you denied it: go to **Settings › Apps › Clean Power VFD › Permissions**, allow **Nearby devices**.
 
## Android 11 and earlier (first launch)

1. When asked to allow **Location** for Bluetooth scanning, tap **Allow**.
2. Keep Bluetooth turned **On** (Quick Settings).

If you denied it: go to **Settings › Apps › Clean Power VFD › Permissions**, allow **Location**.
 
## Quick check if pairing fails

* Bluetooth is **On** and the device is powered/advertising.
* The required permission is **Allowed** (see steps above).
* Toggle Bluetooth off/on and retry.

**Privacy note:** Location/Nearby Devices is requested only because the operating system requires it for Bluetooth discovery. The app does not collect or store your location.