---
title: "DC bus discharge and Power LED"
id: "dc-bus-discharge-and-power-led"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/dc-bus-discharge-and-power-led"
updated: 2026-10-29T18:46:07Z
---

# DC bus discharge and Power LED

[Home](/articles/clean-power-vfd-publication/home) » [Installing the VFD](/articles/clean-power-vfd-publication/installing-the-vfd) » [Electrical Installation](/articles/clean-power-vfd-publication/electrical-installation) » [Electrical installation: Safety messages](/articles/clean-power-vfd-publication/electrical-installation-safety-messages) » DC bus discharge and Power LED

* * *

![](/resources/Storage/clean-power-vfd-publication/res/CleanPowerVFD%20LED%20power.png)

The **Power LED**, identified by the lightning-bolt symbol, indicates the status of the DC bus inside the Clean Power VFD.

* **LED ON:** The DC bus is energized. Hazardous voltage may be present inside the VFD.
* **LED OFF:** The DC bus has discharged below the voltage threshold associated with the Power LED indication.

After disconnecting the VFD from the power supply, the Power LED may remain illuminated while energy stored in the DC bus capacitors is being discharged. **Do not open the VFD until the Power LED has turned off.**

* * *

![](/resources/Storage/clean-power-vfd-publication/res/Safety%20picture%20Red%20Danger.png)

**ELECTRIC SHOCK HAZARD**

* Disconnect all power sources before performing installation, inspection, or maintenance work.
* Do not open the VFD or touch internal components while the Power LED is illuminated.
* After disconnecting power, wait until the Power LED turns off before opening the VFD.

**The Power LED is an indication of DC bus discharge. It does not replace verification of the absence of hazardous voltage using an appropriately rated measuring instrument when electrical work requires verification of a de-energized state.**