---
title: "How to select a VFD?"
id: "how-to-select-a-vfd"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/how-to-select-a-vfd"
updated: 2026-10-29T18:45:52Z
---

# How to select a VFD?

[Home](/articles/clean-power-vfd-publication/home) » How to select a VFD?

* * *
 
The selection of motor and clean power VFDs should be performed by skilled and experienced personnel.

This guide is a supplement, not a replacement for such expertise.

* * *

![](/resources/Storage/clean-power-vfd-publication/res/Safety%20picture%20Yellow%20Caution.png)

## Exceeding Drive Capacity

It is essential to ensure that the motor Full Load Amps (FLA) do not exceed the Variable Frequency Drive (VFD) capability.

If you are using a motor with a published Service Factor ( S.F.), which could be the case in North America, ensure that the Motor Service Factor Amps ( SFA = FLA\* S.F. ) do not exceed the VFD capability.

While our VFDs are equipped with advanced features that may allow the operation of motors with a higher FLA than the drive's specified maximum, this configuration is primarily intended for specific testing purposes in a controlled laboratory environment.

Installation of a motor that exceeds the drive capacity under normal operational conditions is strongly discouraged and may result in equipment failure, decreased efficiency, and potential safety hazards.

## Limitation of Liability

SmartD Technologies is not liable for any issues, damages, or failures that arise from installing a motor with an FLA exceeding the VFD’s rated capability.

It is the responsibility of the user to verify and comply with the drive specifications to ensure safe and optimal operation.