---
title: "I/O's preset configuration"
id: "inputs-and-outputs-preset-configuration"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/inputs-and-outputs-preset-configuration"
updated: 2026-10-29T18:46:07Z
---

# I/O's preset configuration

[Home](/articles/clean-power-vfd-publication/home) » [Functions and parameters](/articles/clean-power-vfd-publication/folder-functions-and-parameters) » [Inputs and outputs](/articles/clean-power-vfd-publication/i-o) » I/O's preset configuration

* * *
 
The following sections explain the two primary methods for wiring your VFD’s control inputs and outputs —commonly referred to as “2-wire” and “3-wire” configurations.

These 2 options offer considerable flexibility in how the VFD is controlled, whether you prefer a simple maintained contact (such as a PLC output) or separate momentary push buttons (like a dedicated start/stop station).

The following sections provide a detailed explanation of each wiring mode and their operational scenarios.

* [2-wires, 3-wires preset I/Os assignment](/articles/clean-power-vfd-publication/2-wires-3-wires-preset-control-modes)
* [3-wires preset - operation](/articles/clean-power-vfd-publication/3-wires-control-mode)
* [2-wires preset - operation](/articles/clean-power-vfd-publication/2-wires-control-mode)