Motor Control Mode

Home » Functions and parameters » Motor Control Mode 


The user can select how the algorithm controls the motor.

Choice can be made between Frequency, Velocity V/f, velocity iFOC, and Torque iFOC

The user selects this parameter during the configuration stage of the VFD and can not change it when the VFD is in operation.

The default value is "Frequency".

Frequency (Hz)

In frequency mode, also known as scalar V/f, the motor speed is set in Hertz (Hz), and the applied voltage is adjusted automatically.

The ratio V/f directly affects the magnetic flux in the motor. This helps prevent motor overheating and saturation, ensuring optimal motor performance.

This mode is suitable for asynchronous three-phase induction motors.

Velocity V/f (RPM)

In Velocity V/f mode, the motor speed is set in revolutions per minute (RPM).

The control is similar to frequency mode, and the slip is automatically compensated to get the motor speed as close as possible to the synchronous speed.

This mode is suitable for asynchronous three-phase induction motors.

Velocity iFOC (RPM)

iFOC, or Indirect Field Oriented Control, is a way to control induction motors. It's an open-loop field-oriented control.

iFOC decouples the rotor flux and torque-producing current components of the stator current.

It means it separates two important aspects of how the motor works - the magnetic field created by the rotor and the force that the motor produces.

By controlling these two things separately, we can make the motor work more efficiently and precisely. 

Torque iFOC (%)

In Torque iFOC mode, the VFD controls the motor torque directly rather than the motor speed.

The user sets a desired torque value in percentage (%), and the VFD adjusts the motor's current to produce the required torque output.

Torque iFOC mode decouples the control of motor torque and flux, allowing for precise management of the torque generated by the motor.

This mode is particularly useful in applications where constant torque is required, such as in conveyors, cranes, and hoists.