---
title: "Motor min and max frequency"
id: "motor-min-and-max-frequency"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/motor-min-and-max-frequency"
updated: 2026-10-29T18:45:56Z
---

# Motor min and max frequency

[Home](/articles/clean-power-vfd-publication/home) » [Functions and parameters](/articles/clean-power-vfd-publication/folder-functions-and-parameters) » [Motor parameters](/articles/clean-power-vfd-publication/motor-parameters) » Motor min and max frequency

* * *

The minimum and maximum frequencies for a 3-phase motor are the lowest and highest frequencies, respectively, at which the motor can operate without causing damage or significantly reducing its lifespan.

The **minimum frequency** is often determined by the motor's cooling system.

At lower frequencies, the motor's speed decreases, which can reduce the effectiveness of fan cooling.

This can cause the motor to overheat, especially under full load conditions.

The **maximum frequency** is typically limited by the motor's insulation system and mechanical construction.

At higher frequencies, the motor's speed increases, which can lead to increased vibration and mechanical stress.

Additionally, higher frequencies can cause increased losses in the motor's iron core and windings, leading to higher operating temperatures.

Most 3-phase motors are designed to operate at a standard frequency of 50 Hz or 60 Hz. When using a VFD, it's important to ensure that the motor's minimum and maximum frequency limits are not exceeded to avoid damaging the motor.

**Always refer to the motor's nameplate or the manufacturer's specifications for the correct minimum and maximum frequency values**.

Operating a motor outside of these limits can lead to performance issues and potential damage to the motor.

**→** [Set Motor frequency limits](/articles/clean-power-vfd-publication/motor-frequency-limits)