---
title: "Motor parameters"
id: "motor-parameters"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/motor-parameters"
updated: 2026-10-29T18:45:57Z
---

# Motor parameters

[Home](/articles/clean-power-vfd-publication/home) » [Functions and parameters](/articles/clean-power-vfd-publication/folder-functions-and-parameters) » Motor parameters

* * *
 
[Motor nominal voltage](/articles/clean-power-vfd-publication/motor-nominal-voltage)

[Motor nominal current](/articles/clean-power-vfd-publication/motor-nominal-current)

[Motor power](/articles/clean-power-vfd-publication/motor-power)

[Motor nominal frequency](/articles/clean-power-vfd-publication/motor-nominal-frequency)

[Motor frequency limits](/articles/clean-power-vfd-publication/motor-frequency-limits)

[Motor number of poles](/articles/clean-power-vfd-publication/motor-number-of-poles)

[Motor nominal speed](/articles/clean-power-vfd-publication/motor-nominal-speed)

[Motor min and max frequency](/articles/clean-power-vfd-publication/motor-min-and-max-frequency)

[Motor phase reversal](/articles/clean-power-vfd-publication/motor-phase-reversal)

[Motor power factor](/articles/clean-power-vfd-publication/motor-power-factor)

## Entering Motor Nameplate Information
 
You can capture motor nameplate data in three ways: **using a camera (AI)**, **selecting a Photo (AI)**, or **manually entering the data**.
 
This section explains when to use each method, how to proceed, and what happens behind the scenes.
 
**![](/resources/Storage/clean-power-vfd-publication/res/Entering-Motor-Nameplate-Information.jpg)**
 
**Before you begin:**
 
* **Internet required for AI:** Camera (AI) and Photo (AI) need an active internet connection. If the phone is offline, these options are unavailable, and you’ll be prompted to use Manual input.
* **Data storage:**

    * Any photo you capture or select is automatically saved in the app’s local database, allowing you to review it later.
    * AI-extracted parameters are saved separately from your corrected values. This preserves a clean audit trail.

## Option 1 — Camera (AI)
 
Use this when you’re in front of the motor and can take a clear, straight-on shot of the nameplate.

1. Tap Camera (AI).
2. Frame the entire nameplate. Use on-screen tools:
    * Torch: tap the torch icon to toggle the phone’s light on/off.
3. Tap the Capture button.
4. Review the image:

    * If it’s blurry, glarey, or cropped: tap Retry to return to the input method selection screen.
    * If it’s good: tap next to use the photo.
5. The app uploads the image for AI processing.
6. If the nameplate lists multiple voltage/frequency setups, you’ll be prompted to select the setup you intend to use (e.g., 460 V @ 60 Hz, 400 V @ 50 Hz).
7. The app shows a Summary of detected parameters. You can review and edit any field.
8. Tap Continue to proceed to the next step of the commissioning wizard.

If AI can’t extract critical parameters (e.g., rated voltage, frequency, rated power, rated current, poles/base speed), you’ll see a failure notice, and the app will propose you to try again.
 
## Option 2 — Photo (AI)
 
Use this when you already have a good picture of the nameplate (e.g., from your gallery or a prior site walk).

1. Tap Photo (AI).
2. Select an existing image that clearly shows the full nameplate.
3. The selected image is saved to the app’s database and uploaded for AI extraction.
4. If multiple setups are detected, choose the desired voltage/frequency setup.
5. Review and edit values on the Summary screen.
6. Tap Continue.

## Option 3 — Manual input
 
Use this when AI is unavailable (no internet) or the photo is unreadable.

1. Tap Manual input.
2. Enter the nameplate fields. Typical required fields include:

    * Rated voltage (V)
    * Rated current (A)
    * Rated power (kW or HP)
    * Frequency (Hz)
    * Number of poles
    * Rated spinning speed (rpm)
    * Min frequency
    * Max frequency
    * Power factor
    * Optional: Brand, motor part number, phase reversal
3. Review and confirm on the Summary screen, then tap Continue.

## Summary screen
 
After any method, you’ll land on a Summary page listing all nameplate parameters. Here you can:

* Adjust fields as needed; dependent fields recalculate automatically where applicable.
* Confirm to move on in the wizard.

## Privacy & storage

* Photos and parameter data are stored in the app’s local database on the phone.
* You can review or remove stored photos later from the app’s data management screens (when available).