Home » Installing the VFD » Mechanical installation » Mounting the HMI remotely
The embedded HMI of the Clean Power VFD can be detached from the front of the drive and mounted remotely for ease of access or visibility.
SmartD recommends using the 5-meter long cable, part number SD-HC-5M to ensure reliable operation. This cable is sold separately and can be ordered directly from SmartD.

1: RJ45 connector
2: Ferrite 1K, 300MHz, 9mm, Clamp
3: Cable cat. 8
|
Important Warning: Do not use a standard Ethernet cable to connect the HMI remotely. Doing so can result in the following issues:
|
|
Using a non-approved cable may void your Clean Power VFD warranty. |
Remote Mounting Instructions:
A mounting template for the remote installation of the HMI is provided in the packaging. Follow the template carefully to ensure proper alignment and secure mounting of the HMI in the desired location.
