---
title: "PID Control setpoint (SV)"
id: "pid-control-setpoint"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/pid-control-setpoint"
updated: 2026-10-29T18:45:52Z
---

# PID Control setpoint \(SV\)

[Home](/articles/clean-power-vfd-publication/home) » [Applications](/articles/clean-power-vfd-publication/applications) » [PID Control](/articles/clean-power-vfd-publication/pid-control) » PID Control setpoint (SV)

* * *

The value read from the setpoint source is named the setpoint Value or SV

You must define the PID setpoint input by choosing either an

* analog input,
* the user-written value from the HMI

* or data received from the communication media.

The setpoint value has two limits that you can define.

If the PID receives a setpoint value out of those limits, it generates an alarm and limits the used value to the closest defined limit.

Minimum and maximum PID setpoint limits: These limits are adjustable between the minimum and maximum values of the process (defined in the [process value](/articles/clean-power-vfd-publication/pid-control-pv) feedback parameters).