---
title: "Stopping the motor"
id: "stopping-the-motor"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/stopping-the-motor"
updated: 2026-10-29T18:46:27Z
---

# Stopping the motor

[Home](/articles/clean-power-vfd-publication/home) » [Functions and parameters](/articles/clean-power-vfd-publication/folder-functions-and-parameters) » [Motor Control Mode](/articles/clean-power-vfd-publication/motor-control-mode) » [General](/articles/clean-power-vfd-publication/general)» Stopping the motor

* * *
 
When the motor is in running status, it can be stopped by receiving a **normal stop** command.

The **normal stop** command is not a stop driven by the torque deactivation function, nor a stop commanded by an alarm action.

The normal stop command can come from:

* a digital I/O that has been configured to do so, or by the absence of a run command in the 2-wires configuration of the I/O
* an action on the stop button of the HMI
* an action on the stop button of the mobile app
* A stop command received from the communication media

While configuring the VFD, the user can define how the VFD stops the motor when the normal stop command is received. This is a configuration made with the mobile App that can not be changed when the VFD is in operation.

Choices are:

* Ramp down
* Freewheel

###  **Ramp Down**

Purpose: [Ramp down](/articles/clean-power-vfd-publication/acceleration-and-deceleration) involves gradually reducing the motor speed over a set time. This is done by decreasing the frequency and voltage supplied to the motor in a controlled manner.

Typical Applications:

* Conveyor Systems: To prevent material spillage or damage by allowing conveyors to come to a smooth and controlled stop.
* Centrifugal Pumps and Fans: To avoid water hammer in pumps and to reduce stress on fans and blowers.
* General Industrial Machinery: To ensure a smooth and controlled deceleration of equipment, minimizing mechanical stress.

### **Freewheel (Coasting)**

Purpose: Freewheel or coasting stop simply removes power from the motor, allowing it to slow down and stop on its own due to friction and load inertia.

Applications:

* Emergency Stop Situations: When an immediate power cut is required without considering the deceleration profile.
* Low-Inertia Loads: Applications where the load naturally comes to a stop quickly without additional braking effort.
* Safety Systems: When safety systems dictate that power should be removed immediately.