---
title: "System reset"
id: "system-reset"
project: "Clean Power VFD User Guide"
url: "https://smartd.clickhelp.co/articles/clean-power-vfd-publication/system-reset"
updated: 2026-10-29T18:46:12Z
---

# System reset

[Home](/articles/clean-power-vfd-publication/home) » [Alarms and Protections](/articles/clean-power-vfd-publication/alarms-and-protections) » System reset

* * *
 
Before executing a system reset, please carefully read the [safety messages about powering the Clean Power VFD](/articles/clean-power-vfd-publication/powering-the-clean-power-vfd-safety-messages).

Note: if there are active alarms of severity major or critical when you execute the reset, the VFD will go back into the lock-out state at the end of the reset action.

Before executing a reset, check and fix all faults that have generated alarms.

## How to reset a locked-out Clean Power VFD?

There are three ways to reset a locked-out Clean Power VFD.

- by sending the reset command to the Clean Power VFD.

- by sending a reset command from a digital input assigned to this function.

- by executing a complete power cycle.

###  

## Reset by sending the reset command from the mobile App

The reset can be executed through a paired smartphone:

From the connected Clean Power VFD dashboard screen, select Menu.

in the displayed action lists, select Reset system state.

Follow the instructions displayed on the screen.
![](/resources/Storage/clean-power-vfd-publication/res/screenshot_to_select_reset_system_state.png)
###  

## Reset by sending the reset command using the VFD's HMI.

From the alarms page, go into the menu.

Then select reset.

![](https://lh3.googleusercontent.com/pNs9um-mvA2qrG0abjTIws8Z3eAc3-WvOZ9PTQFpL9TJP1izqmmilXN5-o0ikvCUVN2Y_CmD3HVY6fgeCXUvfDds_gwPQCKuk1ZgE7ZuRMffxLdPDPm9vH_R1pX92QFnz7UwVQbHmDbzBB4Y-WSnUyycUHsOxHpXWv8ALb1okmav6H0k-hFsy5DFDssqU-1T)

and confirm that you want to reset all the alarms.

![](https://lh4.googleusercontent.com/ccvQ3gKR352abaxTcMnIZdDhsmXmKujghJAIg8aXwnBPuVjaC6f-ujFpEbJdz_MqQcqRgtE6liWOo0Tbl7PViR5QHVkjmvpvOlKJbIJUfu5OU7GJ3pddcmif5PurPkUIvxtX5eRgWcqOBabBxpAf6jYEvNQx2l7lMViEHuIWqCl6Wu90fcS8VcXKfCoBNTsy)

## 

## Reset by sending the reset command using the Modbus TCP register SYSR/articles/clean-power-vfd-publication/system-reset/a/o6sHAnCNyMj54IGQ6qY1fb

The reset can be executed remotely by sending the system reset command from a connected Ethernet network, using the appropriate Modbus command.

A description of the Modbus system reset can be found in this document, section Networks, and communication&gt;[Modbus TCP](/articles/clean-power-vfd-publication/modbus-tcp "Modbus TCP (go to)")

## Reset by sending the reset command using a digital input

The reset can be executed remotely by sending the system reset command from digital input if the user has configured this digital input as the function " reset lockout".

Any available digital input can be assigned to reset the VFD from a lockout state.

[The assignment is a configuration of the digital input.](/articles/clean-power-vfd-publication/digital-inputs-setting)

## Reset with a Power cycle./articles/clean-power-vfd-publication/system-reset/a/QnngnSMV4KeTVt0BMlP1eh

To execute a reset system of your Clean Power VFD, you must do a complete off/on power cycle of the Clean Power VFD.

If your Clean Power VFD is connected to an external 24VDC power supply, you must power off this power supply before powering off the main supply power to the Clean Power VFD.

Power off the main input AC power and wait for 5 minutes to ensure all capacitors are discharged.

Power on the main input AC power and the external 24VDC power supply if any. Your Clean Power VFD will reboot and then will go into ready-to-run status.