Acceleration and deceleration

Home » Functions and parameters » Motor Control Mode » General » Acceleration and deceleration 


Acceleration time

Acceleration time, also known as ramp-up time, defines the duration required for the motor to transition from a standstill to its rated speed.

  • In torque control, it refers to the time needed for the motor torque to increase from zero to 100% of its rated value.

  • The default setting is 20 seconds, but this may not suit all applications.

  • The acceleration time is adjustable up to 3600 seconds.

  • Caution:

    Setting the acceleration time too short can result in overcurrent conditions.

Deceleration time

Deceleration time, also called ramp-down time, controls the time needed for the motor to slow down, typically to a complete stop.

  • In torque control, it defines the time required for the motor torque to decrease from its rated value to zero.

  • The default setting is 20 seconds, but this can also be adjusted up to 3600 seconds to fit specific application needs.

  • During deceleration, the motor speed exceeds the synchronous speed (corresponding to the Clean Power VFD output frequency), causing the motor to act as a generator. This process, known as

    regeneration, results in the motor returning energy to the VFD, causing the DC voltage to increase.

Information if the deceleration time is too short it will produce an overvoltage condition