Compliances and certifications

Home » Compliances and certifications 


Overview

SmartD Technologies is committed to delivering Variable Frequency Drives (VFDs) that meet the highest standards of safety, reliability, and sustainability.

The Clean Power VFD family has been designed and tested following globally recognized standards for safety, electromagnetic compatibility (EMC), environmental performance, and product safety certification.

Compliance with these standards ensures that our drives are suitable for use in industrial environments, are compatible with other electrical equipment, and meet international requirements for energy efficiency and environmental responsibility.

Traceability of Standard Revisions

Standards listed on this page represent the regulatory scope applicable to the Clean Power VFD family.

Note on Versioning: As standards evolve, the specific revision year (e.g., Edition 2 vs. Edition 3) applied to a product depends on its certification date.

To identify the exact standard revisions applied to your specific SKU, please refer to our SmartD VFD Certification Matrix.

Safety Standards Compliance

The Clean Power VFD is built in conformity with both North American and international safety standards applicable to adjustable speed electrical power drive systems.

StandardDescriptionRegion
UL 61800-5-1Safety requirements for electrical power drive systemsUnited States
CSA C22.2 No. 274Canadian national standard equivalent to UL 61800-5-1Canada
IEC 61800-5-1International standard for safety requirements of adjustable speed electrical power drive systemsInternational

Certification File: cULus Listed — File Number E5231214

Markings: cULus Listed (U.S. and Canada)

Electromagnetic Compatibility (EMC)

The Clean Power VFD conforms to the EMC requirements applicable to adjustable speed power drive systems, as defined by the following standards:

IEC 61800-3 – EMC requirements for variable speed electrical power drive systems

This includes both emission and immunity performance for second environment installations (all establishments other than those directly connected to a low voltage power supply network which supplies buildings used for domestic purposes). The Clean Power VFD supports installations compliant with Category C3 environments, as defined by IEC 61800-3 (PDS of rated voltage less than 1,000 V, intended for use in the second environment and not intended for use in the first environment).

Immunity to Disturbances

The VFD has been tested and verified to ensure robustness in the presence of common electromagnetic disturbances. It complies with the following immunity standards:

StandardDescription
IEC 61000-4-2Electrostatic discharge (ESD) immunity
IEC 61000-4-3Radiated, radio-frequency, electromagnetic field immunity
IEC 61000-4-4Electrical fast transient/burst immunity
IEC 61000-4-5Surge immunity
IEC 61000-4-6Conducted disturbances induced by radio-frequency fields
IEC 61000-4-11 and -4-34Voltage dips, short interruptions, and voltage variations

Environmental and Eco-design Standards

SmartD’s environmental practices and product design conform to international regulations on energy efficiency and hazardous substances.

StandardDescription
IEC 61800-9-2Eco-design requirements for power drive systems and motor systems
IEC 63000Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances (RoHS)

These standards align with broader sustainability and circular economy goals and support compliance with the European Eco-design Directive and RoHS Directive.

CE Marking and EU Directives

Where applicable, Clean Power VFDs are marked with the CE logo and comply with the following European Union directives:

DirectiveDescription
2014/35/EULow Voltage Directive (LVD)
2014/30/EUElectromagnetic Compatibility Directive (EMC)
2019/1782/ECEco-design requirements for power supplies
2011/65/EURestriction of Hazardous Substances (RoHS) Directive

⚠️ Note: CE marking is available only for specific part numbers. Please consult the Declaration of Conformity or check the Certification Matrix

REACH (EC 1907/2006)

SmartD’s VFDs are supplied as articles under REACH and are not intended to release substances during normal or reasonably foreseeable use.

We maintain a supplier-to-product due diligence process to monitor the ECHA Candidate List of Substances of Very High Concern (SVHC) and Annex XVII restrictions.

To the best of our knowledge at the time of shipment, our products do not contain SVHCs above 0.1% w/w. If an SVHC were present above 0.1% w/w in any component, SmartD would fulfill Article 33 communication duties and, where applicable, submit a SCIP notification.

Note: REACH is separate from CE marking; a standalone REACH statement is available for download