Configuration application

Home » Mobile App » Configuration application 


Get the smartphone App to configure your Clean Power VFD.

Phone requirements:

  • Android phone with firmware version 9 or higher,
  • iOS phone with firmware version 13.4 or higher.

The Clean Power VFD Application app can be downloaded with any of the methods below:

  • Scan the QR code displayed on the Clean Power VFD's HMI screen, this will bring you to the Google Play Store or Apple Store for App downloading.

  • Click on the below badge for ios users

  • Click on the below badge for Android users

  • or scan the following QR code with your cell phone:

Apple store:


Google Play:


 

On first launch, the app will ask for two permissions so it can find and connect to your device over Bluetooth:

  • Bluetooth access

  • Location (on iOS and older Android) or Nearby devices (on newer Android)

We only use these to enable Bluetooth. We do not track or store your location.

iOS (first launch)

  1. When asked to “Allow Clean Power VFD to use Bluetooth,” tap OK.

  2. If you’re also asked for Location, tap Allow While Using App.

  3. Keep Bluetooth turned On in Control Center/Settings.

If you tapped “Don’t Allow” by mistake: go to Settings › Clean Power VFD, enable Bluetooth and Location.

Android 12 and newer (first launch)

  1. When asked to allow Nearby devices, tap Allow.

  2. Keep Bluetooth turned On (Quick Settings).

If you denied it: go to Settings › Apps › Clean Power VFD › Permissions, allow Nearby devices.

Android 11 and earlier (first launch)

  1. When asked to allow Location for Bluetooth scanning, tap Allow.

  2. Keep Bluetooth turned On (Quick Settings).

If you denied it: go to Settings › Apps › Clean Power VFD › Permissions, allow Location.

Quick check if pairing fails

  • Bluetooth is On and the device is powered/advertising.

  • The required permission is Allowed (see steps above).

  • Toggle Bluetooth off/on and retry.

Privacy note: Location/Nearby Devices is requested only because the operating system requires it for Bluetooth discovery. The app does not collect or store your location.