How to select a VFD?

Home » How to select a VFD? 


The selection of motor and clean power VFDs should be performed by skilled and experienced personnel.

This guide is a supplement, not a replacement for such expertise.  


  

Exceeding Drive Capacity

It is essential to ensure that the motor Full Load Amps (FLA) do not exceed the Variable Frequency Drive (VFD) capability.

If you are using a motor with a published Service Factor ( S.F.), which could be the case in North America, ensure that the  Motor Service Factor Amps ( SFA = FLA* S.F. ) do not exceed the VFD capability. 

While our VFDs are equipped with advanced features that may allow the operation of motors with a higher FLA than the drive's specified maximum, this configuration is primarily intended for specific testing purposes in a controlled laboratory environment.

Installation of a motor that exceeds the drive capacity under normal operational conditions is strongly discouraged and may result in equipment failure, decreased efficiency, and potential safety hazards.

Limitation of Liability

SmartD Technologies is not liable for any issues, damages, or failures that arise from installing a motor with an FLA exceeding the VFD’s rated capability.

It is the responsibility of the user to verify and comply with the drive specifications to ensure safe and optimal operation.