Motor runtime

Home » Metrics » Motor runtime 


Monitoring Motor Operating Hours

The Clean Power VFD keeps the cumulative operating hours of the connected motor.  You have access to this data through four different methods:

  • HMI (Human Machine Interface): You can view the cumulative operating hours of the connected motor on the Clean Power VFD's HMI display.
  • Mobile App: You can view the cumulative operating hours of the connected motor  in the mobile App 
  • Modbus TCP: The cumulative operating hours of the connected motor are accessible through the Clean Power VFD's Modbus TCP communication protocol. This allows integration with monitoring systems. Please refer to the latest Modbus TCP  specifications on the Engineering Tools webpage
  • BACnet IP: The cumulative operating hours of the connected motor are accessible through the Clean Power VFD's BACnet IP communication protocol. Please refer to the latest BACnet IP specifications on the Engineering Tools webpage

Resetting the Cumulative Operating Hours of the Connected Motor 

The cumulative operating hours of the connected motor can be reset, but only when necessary. This is typically done when you replace the motor connected to the Clean Power VFD.

This action ensures that the cumulative operating hours of the newly installed motor are accurate.

Important: Please do not reset these cumulative operating hours unless the motor has been replaced.

Access to the motor metrics

On Mobile go to Menu >> About >> Diagnostic >> System Metrics

On HMI go to Menu >> About >> Diagnostic >> VFD Metrics