Home » Applications » PID Control » PID Control setpoint (SV)
The value read from the setpoint source is named the setpoint Value or SV
You must define the PID setpoint input by choosing either an
- analog input,
- the user-written value from the HMI
- or data received from the communication media.
The setpoint value has two limits that you can define.
If the PID receives a setpoint value out of those limits, it generates an alarm and limits the used value to the closest defined limit.
Minimum and maximum PID setpoint limits: These limits are adjustable between the minimum and maximum values of the process (defined in the process value feedback parameters).