Home ยป Smart HMI

Use fingers only
Operate the HMI touchscreen with your fingers only. Do not press the screen with a pen, screwdriver, tool, or any other hard or sharp object.
Using anything other than fingers may scratch the screen or break the LCD glass. If the LCD glass shatters, the HMI may fail immediately. This risk is greatly increased when force is applied with a pen or other tool.
This section provides an overview of the HMI layout, functions, and operation method.
It is important to have a good understanding of the basic operation of the Clean Power VFD before exploring advanced features, adjusting speed, or changing rotation direction.
The Smart HMI features a graphic touch-screen interface.
It can be attached to the front face of the Clean Power VFD or installed remotely.
If you choose to install the HMI remotely, refer to the instructions provided in the section "Mounting the HMI remotely."
The Clean Power VFD can be managed through its digital and analog I/Os or the Ethernet Ports, allowing for the Smart HMI to be detached and disconnected from the Clean Power VFD if needed.
However, do not disconnect or reconnect the Smart HMI while the Clean Power VFD is powered on.
Always power off the Clean Power VFD before making any changes to the Smart HMI connection.