Change spinning direction

Home » Functions and parameters » Motor Control Mode » General » Spinning direction » Change spinning direction 


The Seamless Direction Change feature allows for a seamless transition between forward and reverse motor directions without bringing the motor to a complete stop.

When enabled, the VFD continues to use the active deceleration and acceleration ramps, providing smoother direction changes.

When the VFD receives the command to spin the motor in the opposite direction from its current rotation, the VFD takes control of a seamless transfer between the two directions, executing a ramp down, followed by a ramp up. Without the need for a standstill stop between the two spinning directions.

This feature enhances operational efficiency, minimizes mechanical stress, and fulfills specific application needs.


Benefits of Seamless Direction Change

  1. Operational Efficiency
    • Reduced Downtime: Avoiding a complete stop reduces interruptions, enhancing productivity in applications with frequent direction changes.
    • Continuous Operation: Critical in processes requiring uninterrupted workflow.
  2. Mechanical Stress Reduction
    • Smooth Transitions: Prevents the sudden jerks and stops that can lead to wear on mechanical components.
  3. Application-Specific Needs
    • Process Continuity: Prevents disruption in sensitive processes, ensuring seamless operation.
    • Precise Control: Allows precise motor direction and speed control without interruption.


Typical Applications

  1. Conveyor Systems
    • Material handling and sorting systems benefit from smooth transitions to avoid jostling or damage.
  2. Cranes and Hoists
    • Precise positioning with minimized load swinging.
  3. Mixing and Agitation
    • In chemical and food processing, smooth changes in direction maintain product consistency.
  4. Textile Machinery
    • High-speed operations without stopping to ensure fabric quality and prevent defects.


Configuration

The Seamless Direction Change feature is configurable in the VFD settings:

Seamless Direction Change:  If the reverse rotation is enabled (the parameter "allow reverse" is enabled in the Motor Controls chapter of the configuration wizard), Seamless Direction Change can be enabled.

This parameter can be set to:

  • Disabled (default): A stop command is required before the VFD will accept a command to spin the motor in the opposite direction from its current rotation.
  • Enabled: The VFD will accept and execute a command to spin the motor in the opposite direction without requiring a stop command in between.



Example:

see the below picture

1 - Run forward and run reverse are simultaneously active. Then the VFD does not start.

2 - Only run forward is active, then the motor ramps up to reach the speed setpoint.

3- Run reverse is activated, Run forward is not activated, and the motor spins in the run forward direction. The run reverse command initiates a bumpless direction change, ramping down the motor as per the active ramp down.

4- at the end of the ramp down, and when the motor reaches zero speed, the VFD accelerates the motor in the reverse direction as per the active user-defined ramp-up to reach the speed setpoint.

5- The stop command is activated. The motor starts to ramp down (or decelerates in freewheeling) as per the user-defined ramp-down time.

6- The run forward command is activated before the ongoing ramp down is complete. As soon the motor reaches zero speed, the VFD accelerates the motor in the forward direction as per the active user-defined ramp-up to reach the speed setpoint.

7. Run reverse is activated and not run forward, then the VFD initiates a bumpless direction change. Before the end of the movement, another command of direction change happens, and then the VFD re-accelerates the motor to keep spinning in the initial direction, as per the active ramp-up time.

8- Run reverse is activated before reaching the setpoint, the VFD acts as in step 3.

9- Stop is activated, and the motor ramp-down till its standstill position