Home » Functions and parameters » Motor parameters » Motor nominal current
Always refer to the motor’s nameplate information for the most accurate FLA values.
FLA or FLC?
While both terms are related to the current drawn by a motor, they have slightly different meanings and uses:
Motor FLA (Full Load Amperes):
This is the actual current drawn by the motor when it is operating at its rated horsepower and rated voltage.
You can find this value on the motor’s nameplate.
It is used for various purposes, including:
- Selecting circuit breakers and overload protection devices for the motor circuit.
- Calculating the power consumption of the motor.
- Comparing the performance of different motors.
Motor FLC (Full Load Current):
This is a standard reference value for the current drawn by a motor of a particular size and type.
You can find these values in tables provided by electrical standards like the National Electrical Code (NEC) in the US.
It is typically used for initial circuit design and planning when the specific motor hasn’t been selected yet.
It is not always identical to the actual FLA of a specific motor, as there can be slight variations between different manufacturers and models.
Key Differences:
- Source: FLA is based on the specific motor, while FLC is a general reference value.
- Accuracy: FLA is more accurate for the specific motor, while FLC is an estimate.
- Use: FLA is used for detailed calculations and selection, while FLC is used for initial planning.
In summary:
Use FLA when you have a specific motor and need accurate information about its current draw.
Use FLC for initial planning and design when the specific motor hasn’t been selected yet.
Formula
The formula to calculate the FLA for a three-phase AC motor is:

In this formula:
- V represents the phase-to-phase voltage for a 3-phase supply.
- Power Factor (PF) is the motor’s rated power factor.
- Efficiency (η) is the motor’s efficiency.