Installation: overall procedure

Home » Installing the VFD » Installation: overall procedure 


The following steps list the sequence to be followed during installation.

Install the product following this sequence and check the operational status.

For more information on each step, refer to the sections below.

  1. Product identification.
  2. Unbox your Clean Power VFD.
    • Stock, carry, and unpack the Clean Power VFD with caution.
  3. Select the installation location.
  4. Follow the instructions to mount your Clean Power VFD onto its support.
  5. Follow the instructions to wire properly and safely the power cables on both the input and output sides.
  6. Follow the recommendations for an efficient grounding
  7. Follow the instructions to wire properly and safely the control signals
  8. Before powering up, follow the verification checklist.
  9. Switch on power to the Clean Power VFD.
  10. Follow the instructions to set up the Clean Power VFD.
  11. Before the operation, perform a test sequence.